Las luces LED para estantes se están convirtiendo en la herramienta de referencia de los grandes minoristas para aumentar la facturación porque no solo hacen que el área de productos sea más brillante y atraen a los clientes.’ atención, but they also include energy-saving, a prueba de explosiones, y características de seguridad. After years of industrial experience, everyone knows that low-voltage shelf lights are best, pero ¿cómo elegir entre las populares luces de bajo voltaje de 12 V y 24 V?? Below, abordaremos esta consulta con más profundidad.
Depending on your needs and the light’s power, you should decide whether to use a 12V or 24V light. While both can be used normally, in this case, I advise using the 24V. The 24V current is almost half as tiny as the 12 current at the same power, and the voltage drop that results causes a very slight decrease in brightness along the LED strip. They vary in the following ways:
1.Various applications
Due to its low power, the 12-volt light can be used in small spaces like closets. Greater brightness can be achieved with the 24-volt light since it has a comparatively high power and a larger current. Since the shelf is typically several meters long and requires series LED light connections, 24 volts is a better option.
2.Varying degrees of heat loss
A 12-volt light uses less energy, produces less heat, and lowers the chance of overheating in part because it has a lower voltage and current. There will be more heat because of the 24 volts of power. The 24-volt service life is less than the 12-volt service life in a small area. Como resultado, while buying the led shelf light, one must make a careful decision based on the quality of the lights and lanterns, not just on price.
Science Fact: There are two different cutting modes for LED light strips: 12 volts and 24 volts. The cutting distance for 24 pay is 5 cm, with 6 lamp beads for each cutting. belt with three lamp beads, one tailoring, and a 12-volt lamp. A pressure decrease occurs at 5 meters for the 12-volt strip and 10 meters for the 24-volt strip. It’s safe to cut because the light belt has been cut.
To sum up, 24-volt lamps are more suitable for shelf life.
More product knowledge:https://www.laidishine.com/
