Status de desenvolvimento do sistema de distribuição da bomba de vácuo
 Status de desenvolvimento do sistema de distribuição da bomba de vácuo

Breve introdução à história da iluminação de armários refrigerados comerciais

Sobre T8

Breve introdução à história da iluminação de armários refrigerados comerciais

With the development of led lighting, the light for commercial refrigerated showcase display/freezer also went through three stages.

1. The first stage: from 2000 para 2009, almost are used T8 fluorescent lamp.

In this stage, T8 fluorescent lamp was worked together with magnetic ballast or electronic ballast, T8 starter and G13 socket.

Below drawing for reference:

Wiring Diagram Of T8 Fluorescent Lamp
When we look back now, we can easy find the main problem as below for T8 t8 refrigeration fluorescent.
----- Not waterproof, the defective rate is high and lifetime is short, normal 6 months.
----- Fragile, T8 fluorescent lamp is of glass house, it should be protected by special PC house outside inside the refrigerators. It effects the lighting output.
----- Installation is complicated as there are lots cables inside commercial refrigerators.
2. The second stage: from 2010 para 2015, the T8 LED lamps start to be used and become popular and popular.
After more than 10years developing, the LED T8 tube started to be used in cold chain lighting. It starts to do retrofitting for T8 fluorescent lamp. More and more supermarkets start to select T8 LED light.

Comparing T8 fluorescent lamp, LED T8 tube has below significant advantages:

A.High quality and good feature:

High reliability and long lifetime with very low light degradation makes our LED T8 to one of the best replacement products for conventional fluorescent lamps. The light output direction is adjustable on the lockable rotating end caps and blue shining ring. It is perfect choice for the replacement of all the traditional tubes.

T8 Fluorescent Lamp
8 Adjustable Light Distributions

B. Até 70% Energy Saving Consumption:
For one 1200mm T8 fluorescent tube, it is min. 36W while T8 LED lamp is only of 20W or 18W.
For one such tube, it is working 15 hours each day, in one year, it can save about 100kwh min. one year. Tem sido amplamente utilizado em cuidados pessoais 2012, Laidishine did test for the LUX comparison, pls refer below:

Different Between T8 Led And Flourscent Tube

C.How to use LED T8 lamp to replace fluorescent tube?
—– When LED tubes are replaced in a standard fluorescent tube batten, the starter must be removed, and replaced by the enclosed fuse.

LED T8 Lamp To Replace Fluorescent Tube 2
ATTENTION: Only suitable for battens with magnetic ballast, not for systems with electronic ballast.
------ Electronic or magnetic ballast can be by-passed by a registered electrician only. This canhelp to safe additional energy.
LED T8 Lamp To Replace Fluorescent Tube 1
3. 2015 to now: Economic waterproof T8 tube was general used.

Around 2015, Laidishine found it is not easy to do waterproof between G13 socket to T8 connection pins and all cables installation are complicated.

So, based on this, Laidishine developed one led T8 tube which is waterproof and special used for commercial refrigerated showcase display. It is one big innovation based on T8 Fluorescent Bulb at that time. Laidishine is the innovator and leader for such T8 tube light which we got patent for invention in China. Below is the main advantages for reference:

A. À prova d'água: the tube is of cable directly which can connect to socket of showcase’s backside. It is not only waterproof, but also save high installation energy.

B Cost down: it helps refrigerator manufacturer free from complex wiring harness connections and to do cost down.

Install Of T8 Led Tube

Of course, any new innovation will meet difficulty. At the beginning, all customers are afraid how to do after sales especially for the oversea market, not dare to use such new light tube. The end users can’t use 4ft t8 fluorescent tubes to replace directly.

We joked “ The magnetic ballast will be canceled in the soon future. Lifetime of t8 fluorescent tube is only 6 para 12 months max, while with such new LED light, you can get 3 years warranty and much better brightness. And you can get more profit for the after sales replacements tubes….” It is funny thing, no need T8 starter ,electronic or magnetic ballast, no more lots cables.

4. Now to future: Lower power and 24VDC voltage with special lens.

Tem sido amplamente utilizado em cuidados pessoais, most refrigerated manufacturers are using IP65 led T8 bulb which is of 220VAC directly. In order to save cost, some small size tubes with smaller driver inside are also popular. But we will see, it is not the future products.

According to Kyoto Protocol / Kigali AmendmentGlobal Warming Concerns , HFC will be Phase-down. We should also consider how to save power and enhance product visibility and attract customers. Any light will generate heat, which will add extra work to the cooling system. Each one watt of lighting expends double power of cooling system.

In Europe and North American, the special light tube with lens and 24VDC are popular using. It can bring homogeneous brightness for whole display. Por exemplo, one 4ft such light is only of 5W, more than 140LM/W which was designed just based the showcase display or freezer shelves.

Some supermarkets have it’s own controller system which can send signal to light to get different color temperature based on existed light, still keep two cables not 4 cables. We say lighting can speak. Laidishine is focusing on such new development and tried his best to keep goods in the right light.

Lighting Solution Of T8 Led Tube

a estrutura de toda a bomba de espuma de acupressão é mais complexa e possui uma câmara de armazenamento de ar adicional:

a estrutura de toda a bomba de espuma de acupressão é mais complexa e possui uma câmara de armazenamento de ar adicional

Aplicação de iluminação de display refrigerado do SPU VC 1

Devendo a conveniência da loja de geladeiras ser desligadas à noite?

Refrigeradores servem como o “Guardiões da frescura” em lojas de conveniência, supermercados, lojas de comida fresca, e outras configurações semelhantes. No entanto, O dilema entre os altos custos de eletricidade e a garantia da qualidade do produto sempre incomodou os operadores. Como superar o “Ansiedade de Powe-Off”? Realizamos análises detalhadas de vários cenários com o objetivo de propor estratégias ideais que não apenas economizam energia, mas também mantêm a qualidade refrigerada dos produtos.

Fatores para vendas de sorvete

Fatores que afetam a venda de sorvete

Muitos distribuidores e comerciantes usuários finais estão cientes de que o segredo para aderir às regulamentações de vendas e aumentar significativamente as vendas é a apresentação eficaz do estoque.. No entanto, a atenção dos clientes está mudando na situação atual do mercado. Criar uma experiência de compra única é especialmente crucial nesta luta sem pólvora para atrair e reter clientes. E como a lâmpada do freezer é o componente central desta configuração, seu significado é óbvio. Otimizando o ambiente de iluminação, particularmente design de iluminação de geladeira, surgiu como um novo campo de batalha para aumentar o apelo do produto e promover a transformação das vendas.

Status de desenvolvimento do sistema de distribuição da bomba de vácuo

Nós responderemos dentro 12 Nós responderemos dentro, Nós responderemos dentro “@laidishine.com”.

Nós responderemos dentro, Nós responderemos dentro Nós responderemos dentro, Nós responderemos dentro, se você tem mais detalhes para produtos ou gostaria de obter uma solução leve negociada.

Proteção de dados

Para cumprir as leis de proteção de dados, pedimos que você revise os pontos-chave no pop-up. Para continuar usando nosso site, você precisa clicar em ‘Aceitar & Fechar'. Você pode ler mais sobre nossa política de privacidade. Documentamos o seu acordo e você pode cancelar acessando nossa política de privacidade e clicando no widget.